Car wiring diagram: replacement of altenator brushes Ford Mondeo.

Check of the established generator During movement of the car the indicating lamp of car wiring diagram gymnastics of the accumulator battery should not burn. Otherwise the generator or a voltage adjuster is faulty. First of all check up all connecting leads of the generator, being verified on car wiring diagram. Then check up a belt tension on a belt pulley and work of an automatic tightener. Other checks are carried out at the removed generator.Do not forget to be verified on wiring diagram.

The established generator is not under repair, at failure it replace with the interchangeable generator on which the guarantee as on the new operates. However in most cases it is possible to inspect the faulty generator in service centre Bosch before installation of the new generator. Thus it can be found out, that the generator can be repaired, if failures are insignificant.




Replacement of altenator brushes on 16-valves the engine spend as follows:











Fig.1. Ford Mondeo car wiring diagram: fastening of an adjuster of the generator on 16-valves the engine.



- Turn out on the rear party of the removed generator bolts of fastening of an adjuster and remove an adjuster;
- Fix a new adjuster on the generator, take out a brush guard pin;
- Establish the generator and connect to the battery;
- Do not forget to be verified on car wiring diagram.


Replacement of altenator brushes by engine V6 spend as follows:












Fig.2. Ford Mondeo car wiring diagram: adjuster fastening to engine V6 generator.



- Turn on on the removed generator a blank-end cover ;
- Turn out bolts of fastening of an adjuster/holder of a brush and take out an adjuster from the generator; - Insert a new adjuster and fix bolts;
- Again establish a blank-end cover, establish the generator and connect it to the accumulator battery;
- Do not forget to be verified on car wiring diagram.

Read more...